Note

This is the documentation for the latest development branch and may refer to features that are not available in released versions. If you are looking for a specific release, use the drop-down menu on the left.

Display Screen Support List

The display-related configuration of the current SDK is located in MPP Configuration -> Display Configuration.

Note: The support list is continuously updated as the SDK evolves. Please refer to the current source code src/rtsmart/mpp/Kconfig for the authoritative list.

Panel / Bridge Chip Driver Layer

The current SDK includes built-in support for various display panels and bridge chips, covering output paths such as DSI, SPI, and HDMI.

Each display solution generally consists of two parts:

• Panel driver (Panel): Responsible for initializing the LCD/screen itself and configuring display parameters

• Bridge chip driver (Bridge): Used to convert DSI/other interfaces into HDMI or other display interfaces

The current drivers support multiple panels and bridge chips, and provide configuration options for different resolutions. The system supports a maximum display output of 1920×1080@60Hz or an equivalent bandwidth capacity.

Panel/Bridge Chip	Configuration Macro
HDMI Bridge: LT9611	MPP_DSI_ENABLE_HDMI_LT9611
LCD Panel: HX8399	MPP_DSI_ENABLE_LCD_HX8399
LCD Panel: ST7701	MPP_DSI_ENABLE_LCD_ST7701
LCD Panel: ILI9806	MPP_DSI_ENABLE_LCD_ILI9806
LCD Panel: ILI9881	MPP_DSI_ENABLE_LCD_ILI9881
LCD Panel: NT35516	MPP_DSI_ENABLE_LCD_NT35516
LCD Panel: NT35532	MPP_DSI_ENABLE_LCD_NT35532
LCD Panel: GC9503	MPP_DSI_ENABLE_LCD_GC9503
LCD Panel: ST7102	MPP_DSI_ENABLE_LCD_ST7102
LCD Panel: AML020T	MPP_DSI_ENABLE_LCD_AML020T
LCD Panel: JD9852	MPP_DSI_ENABLE_LCD_JD9852
SPI LCD Panel: ST7789	MPP_SPI_ENABLE_LCD_ST7789

How to Adapt a New Screen

For the complete procedure, including menuconfig pin configuration, panel driver registration, and initialization sequence addition, please refer to:

• How to Add a Display Driver